🛠️ How to Fix a Leaky Faucet in Washington Quickly
A dripping faucet may seem like a small annoyance, but it can waste gallons of water and lead to higher utility bills. If you're in Washington, PA, and dealing with a leaky faucet, don't wait! Here's a quick DIY guide to stop that drip—brought to you by the trusted experts at Mr. Rooter Plumbing of Pittsburgh.
🔍 Step-by-Step Guide to Fix a Leaky Faucet
1. Turn Off the Water Supply
Before doing anything, locate the shut-off valves under the sink and turn them clockwise to stop the water flow.
2. Plug the Drain
Use a sink stopper or rag to block the drain. This prevents losing small parts down the pipe.
3. Disassemble the Faucet
Use a screwdriver or wrench to remove the handle and unscrew the packing nut. Carefully take apart the faucet to access the cartridge or washer.
4. Inspect and Replace Worn Parts
Check washers, O-rings, or cartridges for damage. Replace any worn or cracked pieces with exact matches from your local hardware store.
5. Reassemble and Test
Put everything back in reverse order, turn the water back on, and test the faucet. If it still leaks, the problem could be deeper in the plumbing system.
🧰 When to Call the Pros
If you’ve followed these steps and the leak continues—or if you're unsure about the repair—it’s time to call in the professionals. For reliable, same-day service in Washington, contact Mr. Rooter Plumbing of Pittsburgh. Our licensed plumbers offer 24/7 emergency service with no overtime charges, and we always stand by our work.
📞 Get Expert Help Today
Visit our website or call us now to schedule a Plumbing service in Washington, PA.

.png)
 
.png) 
 
Comments
Post a Comment